BlogNews

how to clean white film off shower tile

Cleaning white film off shower tile is a common task, especially in areas with hard water. This white film is often caused by mineral deposits, soap scum, or mildew. Here’s how to effectively clean white film off shower tile:

Materials Needed:

  • White vinegar
  • Baking soda
  • A spray bottle
  • A scrub brush or old toothbrush
  • Warm water
  • A squeegee
  • Rubber gloves
  • Optional: Commercial tile cleaner

Step-by-Step Guide:

  1. Put on Gloves:
    • Start by putting on rubber gloves to protect your hands during the cleaning process.
  2. Remove Excess Water:
    • Before cleaning, remove any excess water from the shower surfaces using a squeegee or towel. This will help the cleaning solution work more effectively.
  3. Prepare a Vinegar Solution:
    • Mix equal parts of white vinegar and warm water in a spray bottle. You can also use undiluted white vinegar for tougher stains.
  4. Spray the Vinegar Solution:
    • Liberally spray the white vinegar solution onto the areas with the white film. Ensure you cover the affected tiles thoroughly.
  5. Let it Sit:
    • Allow the vinegar solution to sit on the tiles for about 10-15 minutes. This gives it time to break down mineral deposits and soap scum.
  6. Scrub the Tiles:
    • Use a scrub brush or an old toothbrush to scrub the tiles vigorously. Focus on the areas with the white film. You may need to apply a bit of elbow grease for stubborn stains.
  7. Rinse with Warm Water:
    • Rinse the tiles thoroughly with warm water to remove the vinegar solution and loosened deposits. Use a handheld showerhead or a clean sponge or cloth to rinse.
  8. Apply Baking Soda Paste (if needed):
    • If the white film persists, make a paste by mixing baking soda with a small amount of water. Apply the paste to the affected areas and let it sit for a few minutes. Scrub again, then rinse thoroughly.
  9. Check for Remaining Film:
    • After rinsing, inspect the tiles for any remaining white film. If necessary, repeat the cleaning process.
  10. Dry the Tiles:
    • Use a clean, dry cloth or towel to dry the tiles. This helps prevent future water spots and film from forming.
  11. Optional: Commercial Tile Cleaner:
    • If the white film is particularly stubborn, you can try using a commercial tile cleaner that is suitable for your specific type of tile. Follow the manufacturer’s instructions carefully.
  12. Regular Maintenance:
    • To prevent the buildup of white film in the future, regularly squeegee or wipe down shower tiles after each use to remove excess water. This helps prevent mineral deposits and soap scum from accumulating.

Regular cleaning and maintenance will keep your shower tiles looking clean and free from white film. The vinegar and baking soda method is effective for many types of tile, but be cautious when using abrasive cleaners on delicate or natural stone tiles, as they can cause damage. Always follow the care instructions for your specific tile type.

Leave a Reply

Related Articles

Check Also
Close
Back to top button